~mkrufky/tda18271-pl Changelog

tda18271: display power level after tune if module option "pl" is set

Thu, 27 Aug 2009 00:29:46 -0400

tda18271: display power level after tune if module option "pl" is set

From: Michael Krufky

Priority: normal

Signed-off-by: Michael Krufky

tda18271: update tda18271c2_rf_cal as per NXP's rev.04 datasheet

Sat, 16 Apr 2011 12:22:10 -0400

tda18271: update tda18271c2_rf_cal as per NXP's rev.04 datasheet

From: Michael Krufky

Priority: high

Cc: Stefan Sibiga
Signed-off-by: Michael Krufky

tda18271: update tda18271_rf_band as per NXP's rev.04 datasheet

Sat, 16 Apr 2011 12:22:10 -0400

tda18271: update tda18271_rf_band as per NXP's rev.04 datasheet

From: Michael Krufky

Priority: high

Cc: Stefan Sibiga
Signed-off-by: Michael Krufky

tda18271: fix bad calculation of main post divider byte

Sat, 16 Apr 2011 12:22:10 -0400

tda18271: fix bad calculation of main post divider byte

From: Michael Krufky

R_MPD bit 3 does not depend on analog vs. digital. Just use
(0x7f & pd) directly from the values in the main pll table.

Thanks to Stefan Sibiga for pointing this out.

Priority: high

Cc: Stefan Sibiga
Signed-off-by: Michael Krufky

tda18271: prog_cal and prog_tab variables should be s32, not u8

Sat, 16 Apr 2011 12:22:10 -0400

tda18271: prog_cal and prog_tab variables should be s32, not u8

From: Michael Krufky

Fix type of prog_cal and prog_tab variables to avoid any possible
calculation errors.

Priority: normal

Signed-off-by: Michael Krufky

tda18271: fix calculation bug in tda18271_rf_tracking_filters_init

Sat, 16 Apr 2011 12:22:10 -0400

tda18271: fix calculation bug in tda18271_rf_tracking_filters_init

From: Michael Krufky

Misplaced parenthesis cause a calculation bug in
tda18271_rf_tracking_filters_init

Thanks to Stefan Sibiga for pointing this out.

Priority: high

Cc: Stefan Sibiga
Signed-off-by: Michael Krufky

merge: http://kernellabs.com/hg/~mkrufky/tda18271

Mon, 16 Aug 2010 10:56:44 -0300

merge: http://kernellabs.com/hg/~mkrufky/tda18271

From: Douglas Schilling Landgraf

Signed-off-by: Douglas Schilling Landgraf

tda18271: fix error detection during initialization of first instance

Mon, 03 May 2010 01:10:15 -0400

tda18271: fix error detection during initialization of first instance

From: Michael Krufky

Fix error detection of failures during initialization of first instance:
Dont pass a function into the tda_fail macro. Instead, save the function
return value and pass that into the tda_fail macro.

This prevents the function from being called twice in cases of failure,
for example:

[19026.074070] tuner 4-0060: chip found @ 0xc0 (device #0)
[19026.087755] tda18271 4-0060: creating new instance
[19026.089965] Unknown device detected @ 4-0060, device not supported.
[19026.092233] Unknown device detected @ 4-0060, device not supported.
[19026.092241] tda18271_attach: [4-0060|M] error -22 on line 1275
[19026.092327] tda18271 4-0060: destroying instance

Priority: normal

Signed-off-by: Michael Krufky

backport commit 9db74cf24c038292d353d746cec11f6da368ef4c

Sun, 13 Jun 2010 17:00:23 -0300

backport commit 9db74cf24c038292d353d746cec11f6da368ef4c

From: Douglas Schilling Landgraf

Author: Devin Heitmueller

V4L/DVB: Fix case where fields were not at the correct start location

This patch address an arithmetic error for the case where the only remaining
content in the USB packet was the "225Axxxx" start of active video. In cases
where that happened to be at the end of the frame, we would inject it into the
videobuf (which is incorrect). This caused fields to be intermittently
rendered off by two pixels.

Thanks to Eugeniy Meshcheryakov for bringing this issue to my attention

Priority: normal

Signed-off-by: Douglas Schilling Landgraf

merge: http://www.kernellabs.com/hg/~dheitmueller/v4l-dvb-950qvbi

Mon, 16 Aug 2010 10:44:31 -0300

merge: http://www.kernellabs.com/hg/~dheitmueller/v4l-dvb-950qvbi

From: Douglas Schilling Landgraf

Signed-off-by: Douglas Schilling Landgraf