http://www.kernellabs.com/hg/kernellabs/ en-us kernellabs Changelog kernellabs Changelog merge: http://udev.netup.ru/hg/v4l-dvb-aospan-22fix/ http://www.kernellabs.com/hg/kernellabs/rev/3a3c781f84da
From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>]]> Mauro Carvalho Chehab <mchehab@redhat.com> Wed, 13 Jan 2010 12:05:17 -0200 22-kHz set_tone fix for NetUP Dual DVB-S2-CI card http://www.kernellabs.com/hg/kernellabs/rev/a5a7e3656b40
22-kHz tone can be driven in two ways:
1. LNBH24 can produce 22kHz continuous tone when TEN=1 ( 22 KHz tone output is
always activated ).
2. LNBH24 can reproduce 22kHz tone timings from DSQIN or EXTM pin's when TEN=0.
From LNBH24 datasheet:
"In order to improve design flexibility an external tone input pin is
available (EXTM). The EXTM is a Logic input pin which activates the 22 kHz
tone output, on the VoTX pin, by using the LNBH24 integrated tone generator
(similar to the DSQIN pin function). In fact, the output tone waveform
characteristics will always be internally controlled by the LNBH24 tone
generator and the EXTM signal will be used as a timing control for DiSEqC tone
data encoding on the VoTX output."

In NetUP Dual DVB-S2-CI card 22kHz tone timings on EXTM pin produced by
STV0900 demod:
.set_tone = stv0900_set_tone

redefine to "set_tone = lnbp21_set_tone" is not correct for "NetUP Dual
DVB-S2-CI card".]]> Abylay Ospan <aospan@netup.ru> Wed, 13 Jan 2010 11:01:56 +0300 merge: http://kernellabs.com/hg/~mkrufky/tda8295 http://www.kernellabs.com/hg/kernellabs/rev/c139804d63ad
From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>]]> Mauro Carvalho Chehab <mchehab@redhat.com> Wed, 13 Jan 2010 12:03:27 -0200 tda8290: Fix FM radio easy programming standard selection for TDA8295 http://www.kernellabs.com/hg/kernellabs/rev/02c34a848f98
From: Michael Krufky <mkrufky@kernellabs.com>

Priority: high

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>]]> Michael Krufky <mkrufky@kernellabs.com> Sun, 10 Jan 2010 16:13:33 -0500 merge: http://www.kernellabs.com/hg/~dheitmueller/em28xx-pal-vbi-2 http://www.kernellabs.com/hg/kernellabs/rev/d73adec00a05
From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>]]> Mauro Carvalho Chehab <mchehab@redhat.com> Wed, 13 Jan 2010 12:00:05 -0200 em28xx: add PAL support for VBI http://www.kernellabs.com/hg/kernellabs/rev/17f49d0a92ea
From: Devin Heitmueller <dheitmueller@kernellabs.com>

Make the VBI support work for PAL standards in addition to NTSC.

This work was sponsored by EyeMagnet Limited.

Thanks go out to Andy Walls for providing a CD containing test PAL/VBI captures
and to Steven Toth for providing a PVR-350 to do signal generation with.

Priority: normal

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>]]> Devin Heitmueller <dheitmueller@kernellabs.com> Tue, 24 Nov 2009 21:17:25 -0500 merge: http://www.kernellabs.com/hg/~dheitmueller/dib0700_ir http://www.kernellabs.com/hg/kernellabs/rev/5c91e0ecbc10
From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>]]> Mauro Carvalho Chehab <mchehab@redhat.com> Wed, 13 Jan 2010 11:57:13 -0200 dib0700: rework IR logic for firmware 1.20 http://www.kernellabs.com/hg/kernellabs/rev/64ac4e28c443
From: Devin Heitmueller <dheitmueller@kernellabs.com>

When firmware 1.20 was introduced, the dib0700 switched from a polling model
using a USB control message, to the messages being delivered on a USB bulk
pipe. The code I originally added would do a blocking read on the pipe with a
50ms timeout. Because the dvb-usb-remote code makes use of the global
workqueue, this resulted in the global workqueue being blocked 50% of the
time. Also, the synchronous urb_bulk_msg() call would burn excess CPU time
(reflected as an abnormal increase in the system's load average when devices
were connected).

Rework the logic so that we now setup an asynchronous callback on the bulk
pipe, so that we now only handle RC data when it arrives on the pipe. Note
that we provide a stub function for the RC polling callback so that we can
continue to leverage the shared code in dvb-usb-rc for the setting up of the
input device.

Priority: normal

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>]]> Devin Heitmueller <dheitmueller@kernellabs.com> Mon, 04 Jan 2010 00:43:19 -0500 Add a message with a hint for the review cut-and-paste line http://www.kernellabs.com/hg/kernellabs/rev/8bc5cfdcbd1f
From: Mauro Carvalho Chehab <mchehab@redhat.com>

Priority: normal

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>]]> Mauro Carvalho Chehab <mchehab@redhat.com> Wed, 13 Jan 2010 11:33:25 -0200 merge: http://linuxtv.org/hg/~jfrancois/v4l-dvb http://www.kernellabs.com/hg/kernellabs/rev/12f99f52246d
From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>]]> Mauro Carvalho Chehab <mchehab@redhat.com> Wed, 13 Jan 2010 11:19:30 -0200